Combined miRNA and mRNA sequencing reveals the defensive strategies of resistant YHY15 rice against differentially virulent brown planthoppers.

Introduction: The brown planthopper (BPH) poses a significant threat to rice production in Asia. The use of resistant rice varieties has been effective in managing this pest. However, the adaptability of BPH to resistant rice varieties has led to the emergence of virulent populations, such as biotype Y BPH. YHY15 rice, which carries the BPH resistance gene Bph15, exhibits notable resistance to biotype 1 BPH but is susceptible to biotype Y BPH. Limited information exists regarding how resistant rice plants defend against BPH populations with varying levels of virulence. Methods: In this study, we integrated miRNA and mRNA expression profiling analyses to study the differential responses of YHY15 rice to both avirulent (biotype 1) and virulent (biotype Y) BPH. Results: YHY15 rice demonstrated a rapid response to biotype Y BPH infestation, with significant transcriptional changes occurring within 6 hours. The biotype Y-responsive genes were notably enriched in photosynthetic processes. Accordingly, biotype Y BPH infestation induced more intense transcriptional responses, affecting miRNA expression, defenserelated metabolic pathways, phytohormone signaling, and multiple transcription factors. Additionally, callose deposition was enhanced in biotype Y BPH-infested rice seedlings. Discussion: These findings provide comprehensive insights into the defense mechanisms of resistant rice plants against virulent BPH, and may potentially guide the development of insect-resistant rice varieties.

Optimal design of a gravitational wave telescope system for the suppression of stray light.

For gravitational wave detection, the telescope is required to have an ultra-low wavefront error and ultra-high signal-to-noise ratio, where the power of the stray light should be controlled on the order of less than 10-10. In this work, we propose an alternative stray light suppression method for the optical design of an off-axis telescope with four mirrors by carefully considering the optimal optical paths. The method includes three steps. First, in the period of the optical design, the stray light caused by the tertiary mirror and the quaternary mirror is suppressed by increasing the angle formed by the optical axes of the tertiary mirror and the quaternary mirror and reducing the radius of curvature of the quaternary mirror as much as possible to make sure the optical system provides a beam quality with a wavefront error less than λ/80. Next, the stray light could satisfy the requirement of the order of 10-10 when the level of roughness reaches 0.2 nm, and the pollution of mirrors is controlled at the level of CL100. Finally, traditional stray light suppression methods should also be applied to mechanics, including the use of the optical barrier, baffle tube, and black paint. It can be seen that the field stop can efficiently reduce stray light caused by the secondary mirror by more than 55% in the full field of view. The baffle tube mounted on the position of the exit pupil can reduce the overall stray light energy by 5%, and the difference between the ideal absorber (absorption coefficient is 100%) and the actual black paint (absorption coefficient is 90%) is 3.2%. These simulation results are confirmed by the Monte Carlo method for a stray light analysis. Based on the above results, one can conclude that the geometry structure of the optical design, the quality of mirrors, and the light barrier can greatly improve the stray light suppression ability of the optical system, which is vital when developing a gravitational wave telescope with ultra-low stray light energy.

The Impact of Bisphenol A on the Anaerobic Sulfur Transformation: Promoting Sulfur Flow and Toxic H2S Production.

Bisphenol A (BPA), as a typical leachable additive from microplastics and one of the most productive bulk chemicals, is widely distributed in sediments, sewers, and wastewater treatment plants, where active sulfur cycling takes place. However, the effect of BPA on sulfur transformation, particularly toxic H2S production, has been previously overlooked. This work found that BPA at environmentally relevant levels (i.e., 50-200 mg/kg total suspended solids, TSS) promoted the release of soluble sulfur compounds and increased H2S gas production by 14.3-31.9%. The tryptophan-like proteins of microbe extracellular polymeric substances (EPSs) can spontaneously adsorb BPA, which is an enthalpy-driven reaction (ΔH = -513.5 kJ mol-1, ΔS = -1.60 kJ mol-1K -1, and ΔG = -19.52 kJ mol-1 at 35 °C). This binding changed the composition and structure of EPSs, which improved the direct electron transfer capacity of EPSs, thereby promoting the bioprocesses of organic sulfur hydrolysis and sulfate reduction. In addition, BPA presence enriched the functional microbes (e.g., Desulfovibrio and Desulfuromonas) responsible for organic sulfur mineralization and inorganic sulfate reduction and increased the abundance of related genes involved in ATP-binding cassette transporters and sulfur metabolism (e.g., Sat and AspB), which promoted anaerobic sulfur transformation. This work deepens our understanding of the interaction between BPA and sulfur transformation occurring in anaerobic environments.

Observations of the effectiveness, dosage, and prognosis of intensity-modulated radiation therapy under ultrasonic guidance for cervical cancer patients.

BACKGROUND: Volumetric modulated arc therapy (VMAT) guided by ultrasound is a novel radiation therapy technique that facilitates the delineation of the tumor target area under image guidance, enhancing the precision of radiation therapy and maximizing the protection of surrounding tissues. OBJECTIVE: The objective of this paper is to investigate the effectiveness of VMAT under ultrasonic guidance for cervical cancer patients and its impact on radiotherapy dosage and prognosis. METHODS: A retrospective analysis encompassed 128 instances of cervical cancer patients who were admitted to our medical facility between April 2019 and April 2021. The patients were categorized into an observation cohort and a control cohort, depending on variations in treatment modalities post-admission. The control group underwent conventional radiotherapy, whereas the observation group received VMAT guided by ultrasound. Clinical efficacy, average radiation dosages (in the radiotherapy target area, rectum, and bladder), radiotherapy-related toxicities during treatment, and one-year survival rates were compared between the two groups. Additionally, variances in pre- and post-treatment serum levels of squamous cell carcinoma antigen (SCC-Ag), carcinoembryonic antigen (CEA), and carbohydrate antigen 724 (CA724) were subjected to assessment. RESULTS: When compared to the control group (64.52%), the observation cohort's comprehensive effectiveness rate was considerably greater (80.30%). The observation group saw lower average radiation exposures and a reduction in the post-treatment concentrations of CEA, SCC-Ag, and CA724. The overall incidence of adverse effects from radiation treatment also declined. The observation group had a greater one-year survival rate (90.48%) than the control group (73.33%). When comparing the observation cohort to the control group, Kaplan-Meier survival analysis showed a significantly higher one-year survival rate (Log-Rank = 6.530, P= 0.011). CONCLUSION: VMAT guided by ultrasound for patients with cervical cancer demonstrates promising short- and long-term treatment outcomes. It also leads to improvements in serum CEA, SCC-Ag, and CA724 levels, as well as reductions in the average radiation dosages to the radiotherapy target area, rectum, and bladder. This approach warrants attention from clinicians in clinical practice.

Discrimination among Fresh, Frozen-Stored and Frozen-Thawed Beef Cuts by Hyperspectral Imaging.

The detection of the storage state of frozen meat, especially meat frozen-thawed several times, has always been important for food safety inspections. Hyperspectral imaging (HSI) is widely applied to detect the freshness and quality of meat or meat products. This study investigated the feasibility of the low-cost HSI system, combined with the chemometrics method, to classify beef cuts among fresh (F), frozen-stored (F-S), frozen-thawed three times (F-T-3) and frozen-thawed five times (F-T-5). A compact, low-cost HSI system was designed and calibrated for beef sample measurement. The classification model was developed for meat analysis with a method to distinguish fat and muscle, a CARS algorithm to extract the optimal wavelength subset and three classifiers to identify each beef cut among different freezing processes. The results demonstrated that classification models based on feature variables extracted from differentiated tissue spectra achieved better performances, with ACCs of 92.75% for PLS-DA, 97.83% for SVM and 95.03% for BP-ANN. A visualization map was proposed to provide detailed information about the changes in freshness of beef cuts after freeze-thawing. Furthermore, this study demonstrated the potential of implementing a reasonably priced HSI system in the food industry.

Miniaturized Implantable Fluorescence Probes Integrated with Metal-Organic Frameworks for Deep Brain Dopamine Sensing.

Continuously monitoring neurotransmitter dynamics can offer profound insights into neural mechanisms and the etiology of neurological diseases. Here, we present a miniaturized implantable fluorescence probe integrated with metal-organic frameworks (MOFs) for deep brain dopamine sensing. The probe is assembled from physically thinned light-emitting diodes (LEDs) and phototransistors, along with functional surface coatings, resulting in a total thickness of 120 µm. A fluorescent MOF that specifically binds dopamine is introduced, enabling a highly sensitive dopamine measurement with a detection limit of 79.9 nM. A compact wireless circuit weighing only 0.85 g is also developed and interfaced with the probe, which was later applied to continuously monitor real-time dopamine levels during deep brain stimulation in rats, providing critical information on neurotransmitter dynamics. Cytotoxicity tests and immunofluorescence analysis further suggest a favorable biocompatibility of the probe for implantable applications. This work presents fundamental principles and techniques for integrating fluorescent MOFs and flexible electronics for brain-computer interfaces and may provide more customized platforms for applications in neuroscience, disease tracing, and smart diagnostics.

Design of Mantis-Shrimp-Inspired Multifunctional Imaging Sensors with Simultaneous Spectrum and Polarization Detection Capability at a Wide Waveband.

The remarkable light perception abilities of the mantis shrimp, which span a broad spectrum ranging from 300 nm to 720 nm and include the detection of polarized light, serve as the inspiration for our exploration. Drawing insights from the mantis shrimp's unique visual system, we propose the design of a multifunctional imaging sensor capable of concurrently detecting spectrum and polarization across a wide waveband. This sensor is able to show spectral imaging capability through the utilization of a 16-channel multi-waveband Fabry-Pérot (FP) resonator filter array. The design incorporates a composite thin film structure comprising metal and dielectric layers as the reflector of the resonant cavity. The resulting metal-dielectric composite film FP resonator extends the operating bandwidth to cover both visible and infrared regions, specifically spanning a broader range from 450 nm to 900 nm. Furthermore, within this operational bandwidth, the metal-dielectric composite film FP resonator demonstrates an average peak transmittance exceeding 60%, representing a notable improvement over the metallic resonator. Additionally, aluminum-based metallic grating arrays are incorporated beneath the FP filter array to capture polarization information. This innovative approach enables the simultaneous acquisition of spectrum and polarization information using a single sensor device. The outcomes of this research hold promise for advancing the development of high-performance, multifunctional optical sensors, thereby unlocking new possibilities in the field of optical information acquisition.

Proposal of Streptomyces bellus Margalith and Beretta 1960 as a Later Heterotypic Synonym of Streptomyces coeruleorubidus (Preobrazhenskaya 1957) Pridham et al. 1958 and an Emended Description of Streptomyces coeruleorubidus.

In the present work, the taxonomic relationship between Streptomyces coeruleorubidus and Streptomyces bellus was reevaluated by a comprehensive comparison of phenotypic, chemotaxonomic and genomic characteristics, as well as phylogeny. In 1957 and 1960, Streptomyces coeruleorubidus and Streptomyces bellus were described as two novel Streptomyces species. The full-length 16S rRNA gene sequence analysis indicated that Streptomyces bellus JCM 4292T shared highest sequence identity with Streptomyces coerulescens ISP 5146T (100%). Phylogenetic analysis of 16S rRNA gene sequence showed that S. bellus JCM 4292T was most closely related to Streptomyces coerulescens ISP 5146T. Phylogenetic analysis of five housekeeping gene sequences demonstrated that S. bellus JCM 4292T was most closely related to S. coeruleorubidus ATCC 13740T. Nevertheless, the ANIm (average nucleotide identity based on MuMmer ultra-rapid aligning tool) and dDDH (digital DNA-DNA hybridization) values between them were 97.71% and 81.9%, respectively, greater than the threshold of 96.7% and 70% for the delineation of Streptomyces species, suggesting that they represent the same genomic species. In addition, phenotypic and chemotaxonomic characteristics, as well as phylogeny and genomic DNA-DNA correlation analysis also confirmed the above conclusion. Consequently, we proposed that S. bellus Margalith and Beretta 1960 is a later heterotypic synonym of S. coeruleorubidus (Preobrazhenskaya 1957) Pridham et al. 1958.

Long-cycling and High-voltage Solid State Lithium Metal Batteries Enabled by Fluorinated and Crosslinked Polyether Electrolytes.

Solid-state lithium metal batteries (LMBs), constructed through the in situ fabrication of polymer electrolytes, are considered a critical strategy for the next-generation battery systems with high energy density and enhanced safety. However, the constrained oxidation stability of polymers, such as the extensively utilized polyethers, limits their applications in high-voltage batteries and further energy density improvements. Herein, an in situ fabricated fluorinated and crosslinked polyether-based gel polymer electrolyte, FGPE, is presented, exhibiting a high oxidation potential (5.1 V). The fluorinated polyether significantly improves compatibility with both lithium metal and high-voltage cathode, attributed to the electron-withdrawing -CF3 group and the generated LiF-rich electrolyte/electrode interphase. Consequently, the solid-state Li||LiNi0.6Co0.2Mn0.2O2 batteries employing FGPE demonstrate exceptional cycling performances of 1000 cycles with 78 % retention, representing one of the best results ever reported for polymer electrolytes. Moreover, FGPE enables batteries to operate at 4.7 V, realizing the highest operating voltage of polyether-based batteries to date. Notably, our designed in situ FGPE provides the solid-state batteries with exceptional cycling stability even at practical conditions, including high cathode loading (21 mg cm-2) and industry-level 18650-type cylindrical cells (1.3 Ah, 500 cycles). This work provides critical insights into the development of oxidation-stable polymer electrolytes and the advancement of practical high-voltage LMBs.

Application of deep learning radiomics in oral squamous cell carcinoma-Extracting more information from medical images using advanced feature analysis.

OBJECTIVE: To conduct a systematic review with meta-analyses to assess the recent scientific literature addressing the application of deep learning radiomics in oral squamous cell carcinoma (OSCC). MATERIALS AND METHODS: Electronic and manual literature retrieval was performed using PubMed, Web of Science, EMbase, Ovid-MEDLINE, and IEEE databases from 2012 to 2023. The ROBINS-I tool was used for quality evaluation; random-effects model was used; and results were reported according to the PRISMA statement. RESULTS: A total of 26 studies involving 64,731 medical images were included in quantitative synthesis. The meta-analysis showed that, the pooled sensitivity and specificity were 0.88 (95 %CI: 0.87∼0.88) and 0.80 (95 %CI: 0.80∼0.81), respectively. Deeks' asymmetry test revealed there existed slight publication bias (P = 0.03). CONCLUSIONS: The advances in the application of radiomics combined with learning algorithm in OSCC were reviewed, including diagnosis and differential diagnosis of OSCC, efficacy assessment and prognosis prediction. The demerits of deep learning radiomics at the current stage and its future development direction aimed at medical imaging diagnosis were also summarized and analyzed at the end of the article.

The FAK/occludin/ZO-1 complex is critical for cadmium-induced testicular damage by disruption of the integrity of the blood-testis barrier in chickens.

Cadmium (Cd) is a well-known testis toxicant. The blood-testis barrier (BTB) is a crucial component of the testis. Cd can disrupt the integrity of the BTB and reproductive function. However, the mechanism of Cd-induced disruption of BTB and testicular damage has not been fully elucidated. Here, our study investigates the effects of Cd on BTB integrity and testicular dysfunction. 80 (aged 1 day) Hy-Line white variety chickens were randomly designed into 4 groups and treated for 90 days, as follows: control group (essential diet), 35 Cd, 70 Cd and 140 Cd groups (35, 70 and 140 mg/kg Cd). The results found that Cd exposure diminished volume of the testes and induced histopathological lesions in the testes. Exposure to Cd induced an inflammatory response, disrupted the structure and function of the FAK/occludin/ZO-1 protein complex and disrupted the tight junction and adherens junction in the BTB. In addition, Cd exposure reduced the expression of steroid-related proteins and inhibited testosterone synthesis. Taken together, these data elucidate that Cd disrupts the integrity of the BTB and further inhibits spermatogenesis by dissociating the FAK/occludin/ZO-1 complex, which provides a basis for further investigation into the mechanisms of Cd-induced impairment of male reproductive function and pharmacological protection.

In-Situ Cross-linked F- and P-Containing Solid Polymer Electrolyte for Long-Cycling and High-Safety Lithium Metal Batteries with Various Cathode Materials.

The practical application of lithium metal batteries (LMBs) has been hindered by limited cycle-life and safety concerns. To solve these problems, we develop a novel fluorinated phosphate cross-linker for gel polymer electrolyte in high-voltage LMBs, achieving superior electrochemical performance and high safety simultaneously. The fluorinated phosphate cross-linked gel polymer electrolyte (FP-GPE) by in-situ polymerization method not only demonstrates high oxidation stability but also exhibits excellent compatibility with lithium metal anode. LMBs utilizing FP-GPE realize stable cycling even at a high cut-off voltage of 4.6 V (vs Li/Li+) with various high-voltage cathode materials. The LiNi0.6Co0.2Mn0.2O2|FP-GPE|Li battery exhibits an ultralong cycle-life of 1200 cycles with an impressive capacity retention of 80.1 %. Furthermore, the FP-GPE-based batteries display excellent electrochemical performance even at practical conditions, such as high cathode mass loading (20.84 mg cm-2), ultrathin Li (20 µm), and a wide temperature range of -25 to 80 °C. Moreover, the first reported solid-state 18650 cylindrical LMBs have been successfully fabricated and demonstrate exceptional safety under mechanical abuse. Additionally, the industry-level 18650 cylindrical LiMn2O4|FP-GPE|Li4Ti5O12 cells demonstrate a remarkable cycle-life of 1400 cycles. Therefore, the impressive electrochemical performance and high safety in practical batteries demonstrate a substantial potential of well-designed FP-GPE for large-scale industrial applications.

Balancing Flexible Side Chains on 2D Conjugated Acceptors Enables High-Performance Organic Solar Cell.

Balancing the rigid backbones and flexible side chains of light-harvesting materials is crucially important to reach optimized intermolecular packing, micromorphology, and thus photovoltaic performance of organic solar cells (OSCs). Herein, based on a distinctive CH-series acceptor platform with 2D conjugation extended backbones, a series of nonfullerene acceptors (CH-6F-Cn) are synthesized by delicately tuning the lengths of flexible side chains from n-octyl to n-amyl. A systemic investigation has revealed that the variation of the side chain's length can not only modulate intermolecular packing modes and crystallinity but also dramatically improve the micromorphology of the active layer and eventual photovoltaic parameters of OSCs. Consequently, the highest PCE of 18.73% can be achieved by OSCs employing D18:PM6:CH-6F-C8 as light-harvesting materials.

Direct-Write Printed Slippery Surface for Assembling a High-Quality Graphene Structure and Its Application in Flexible Electric Actuators.

Graphene is a two-dimensional honeycomb-like nanomaterial generated by carbon atoms in sp2 hybridized orbitals to form a hexagonal lattice structure with excellent electrical, optical, and mechanical properties. The solution process method has been widely used to realize large-area patterned graphene structures for high-performance devices. In the method, graphene usually needs to be dispersed in solution, and the π-π bonding gravitational interactions between graphene sheets would lead to uncontrollable structures in solution and difficulty in obtaining high performance. In this work, a patterned graphene oxide (GO) structure with controllable thickness and layer spacing was realized by a direct-write printed slippery surface, which was used as a slippery limited template. After reducing GO into reduced graphene oxide (rGO), a flexible electric pattern with a conductivity of up to 6.425 × 103 S/m was realized. Furthermore, the patterned rGO structure was transferred on polydimethylsiloxane (PDMS), which could generate less than a 5% change in resistance after 10,000 consecutive bends, and an anisotropic expansion based on rGO and PDMS materials under electro-thermal coupling. The patterned rGO structures could meet the performance requirements of highly sensitive and complex deformation applications as flexible electric actuators. This study provides great research significance and application value for patterning high-quality graphene structures and realizing high-performance flexible electronic devices.

What is the Limit Size of 2D Conjugated Extension on Central Units of Small Molecular Acceptors in Organic Solar Cells?

2D conjugated extension on central units of small molecular acceptors (SMAs) has gained great successes in reaching the state-of-the-art organic photovoltaics. Whereas the limit size of 2D central planes and their dominant role in constructing 3D intermolecular packing networks are still elusive. Thus, by exploring a series of SMAs with gradually enlarged central planes, it is demonstrated that, at both single molecular and aggerated levels, there is an unexpected blue-shift for their film absorption but preferable reorganization energies, exciton lifetimes and binding energies with central planes enlarging, especially when comparing to their Y6 counterpart. More importantly, the significance of well-balanced molecular packing modes involving both central and end units is first disclosed through a systematic single crystal analysis, indicating that when the ratio of central planes area/end terminals area is no more than 3 likely provides a preferred 3D intermolecular packing network of SMAs. By exploring the limit size of 2D central planes, This work indicates that the structural profiles of ideal SMAs may require suitable central unit size together with proper heteroatom replacement instead of directly overextending 2D central planes to the maximum. These results will likely provide some guidelines for future better molecular design.

Global research on RNA vaccines for COVID-19 from 2019 to 2023: a bibliometric analysis.

Background: Since the global pandemic of COVID-19 has broken out, thousands of pieces of literature on COVID-19 RNA vaccines have been published in various journals. The overall measurement and analysis of RNA vaccines for COVID-19, with the help of sophisticated mathematical tools, could provide deep insights into global research performance and the collaborative architectural structure within the scientific community of COVID-19 mRNA vaccines. In this bibliometric analysis, we aim to determine the extent of the scientific output related to COVID-19 RNA vaccines between 2019 and 2023. Methods: We applied the Bibliometrix R package for comprehensive science mapping analysis of extensive bibliographic metadata retrieved from the Web of Science Core Collection database. On January 11th, 2024, the Web of Science database was searched for COVID-19 RNA vaccine-related publications using predetermined search keywords with specific restrictions. Bradford's law was applied to evaluate the core journals in this field. The data was analyzed with various bibliometric indicators using the Bibliometrix R package. Results: The final analysis included 2962 publications published between 2020 and 2023 while there is no related publication in 2019. The most productive year was 2022. The most relevant leading authors in terms of publications were Ugur Sahin and Pei-Yong, Shi, who had the highest total citations in this field. The core journals were Vaccines, Frontiers in Immunology, and Viruses-Basel. The most frequently used author's keywords were COVID-19, SARS-CoV-2, and vaccine. Recent COVID-19 RNA vaccine-related topics included mental health, COVID-19 vaccines in humans, people, and the pandemic. Harvard University was the top-ranked institution. The leading country in terms of publications, citations, corresponding author country, and international collaboration was the United States. The United States had the most robust collaboration with China. Conclusion: The research hotspots include COVID-19 vaccines and the pandemic in people. We identified international collaboration and research expenditure strongly associated with COVID-19 vaccine research productivity. Researchers' collaboration among developed countries should be extended to low-income countries to expand COVID-19 vaccine-related research and understanding.

Macular Neural and Microvascular Alterations in Type 2 Diabetes Without Retinopathy: A SS-OCT Study.

PURPOSE: To identify specific markers indicative of macular neural and microvascular alterations in individuals with Type 2 Diabetes Mellitus (T2DM) without clinically observable retinopathy. DESIGN: Prospective cross-sectional study. METHODS: Using the PLEX Elite 9000, all eyes underwent swept-source optical coherence tomography (SS-OCT) angiography. Quantitative analysis of acquired images compared macular neural and microvascular alterations in T2DM patients without retinopathy to age-matched controls. Precise assessments encompassed measuring the thickness of each individual retinal layer and evaluating macular vascular indices within different capillary plexuses. RESULTS: Forty-nine T2DM patients and 51 age-matched controls participated. T2DM patients exhibited a significant reduction in the mean macular thickness of the ganglion cell-inner plexiform layer (GC-IPL) (82.5 ± 5.5 µm vs 86.2 ± 5.0 µm, P = .001) and macular retinal nerve fiber layer (RNFL) (45.8 ± 3.0 µm vs 48.1 ± 3.7 µm, P = .001). Furthermore, macular full retinal thickness was significantly lower in diabetic eyes than controls (324.9 ± 16.3 µm vs 332.8 ± 13.7 µm, P = .009). Vascular measurements revealed subtle changes in macular vascular skeleton density within the total capillary plexuses in T2DM patients (0.132 ± 0.005 vs 0.135 ± 0.005, P = .019). CONCLUSIONS: Metrics derived from SS-OCT, particularly macular RNFL and GC-IPL thicknesses, emerged as superior indicators for the early detection of diabetic retinal disease in individuals with T2DM without clinically observable retinopathy. Further investigations are warranted to comprehensively understand the clinical implications of these findings.

Differential Cantilever Enhanced Fiber-Optic Photoacoustic Sensor for Diffusion Gas Detection.

Aiming at the problem of the fiber-optic photoacoustic (PA) sensor being easily disturbed by external vibration and noise, a differential cantilever enhanced fiber-optic PA sensor is proposed for diffusion gas detection. The sensor comprises two PA tubes with the same structure and a pair of differential interferometric cantilevers. The two PA tubes are symmetrically distributed. The laser is incident on the PA tube as the signal channel to excite the PA pressure wave. Another tube without incident laser is used as the reference channel to suppress external disturbance. The external interference signals and PA signals superimposed with disturbance are detected by the differential cantilevers from the two channels. The signals are simultaneously restored by a single white-light interferometry demodulator, which multiplexed the spectral frequency domain of the superimposed interference spectrum. The experimental results show that the suppression effect of the differential cantilever enhanced PA sensor on ambient noise is improved by 80%, compared to the traditional single-cantilever sensor. The external cofrequency disturbance is suppressed by 20.9 dB. The minimum detection limit to acetylene (C2H2) downs to about 60 ppb with an integration time of 100 s. The sensor has excellent antivibration and electromagnetic interference ability.

Fiber-Optic Photoacoustic CO Sensor for Gas Insulation Equipment Monitoring Based on Cantilever Differential Lock-In Amplification and Optical Excitation Enhancement.

A fiber-optic photoacoustic CO sensor for gas insulation equipment is proposed, which relies on F-P interferometric cantilever-based differential lock-in amplification and optical multipass excitation enhancement. The sensor has excellent characteristics of high sensitivity, antielectromagnetic interference, fast response, and long-distance detection. The photoacoustic pressure waves in the two resonators of the differential photoacoustic cell (DPAC) are simultaneously detected by two fiber-optic interferometric cantilevers and processed differentially; thereby, the gas flow noise is effectively suppressed. Based on the comprehensive analysis of the superposition of photoacoustic excitation and multipass absorption, the diameter of the resonator is determined to be 6 mm. The optical power emitted by the 1566.6 nm distributed feedback laser is increased to 500 mW by an erbium-doped fiber amplifier. The near-infrared light is reflected 30 times in the multipass cell, which improves the order of magnitude of optical effective excitation. Due to the low sound velocity of SF6 gas, the resonant frequency of the DPAC with a resonator length of 80 mm is 760 Hz. The response time to CO/SF6 gas is 93 s with a flow rate of 500 sccm. The detection limit of the CO sensor is 53 ppb, which realizes the accurate and timely perception of the SF6 decomposition derivative CO and provides technical support for trouble-free operation of gas insulation equipment.